When your offices are closed, you have two options: you can offer your customers no information about your products, or you can install our touchfoil directly to your window for them to interact with (increasing sales). Complete with rear-projection or LCD screen behind and you will create a great user experience. You can also orient the touch surface horizontally as a tabletop or vertically as a kiosk. (Please see individual product pages for more information)

Use this touch film in interactive setups where an Infrared Touch Frame would not work, such as in a sun-lit window or a bezel-less bar top. This projected capacitance film gives your entire image area 1, 2, 10, or 20 touch points, so it can be used in any installation. Simply laminate the film to your surface and you are ready to go.

Easy to setup and apply to glass, acrylic, rear-projection screens and any non-metallic materials

Fits flush with glass (no bezel!)

External lighting (whether visible or infrared) not a factor making installations in sunlight possible

All components safely concealed and protected

Works even with gloves or when wet

Works on curved surfaces

The touchfoil can be adhered to any non-metallic substrate and when touched, the capacitance changes (similar to today's smartphones screens). This change is detected by the controller calculating the X and Y coordinates which are then communicated to your computer and your interactive software application. The film is composed of tiny wires embedded in the clear mylar film. The controller circuit board hangs off one edge and connects to the computer via USB.

Customize your Touch Film by choosing: Fixing Option, Screen Ratio, and Controller Location

Please click a company below to start purchasing:


Pro-Cap films from Displax come in three forms, either 2, 10 or 20 touch point multitouch.




Pro-Cap films from Visual Planet come in two forms, either a single 1 touch or a dual 2 multitouch.