Red Light (650nm) Filter

This is a narrow single band filter that allows only Red light to enter the camera sensor.

30mm Glass Threaded Version:

This threaded filter requires our 30mm Filter Adapter Ring - Lens Surround which pushes over the standard black plastic lens surround on the GoPro Hero cameras.

Specifications:
Weight: 5.83g
Mount: M30 x 0.75mm
Mount Material: Metal
Optics Material: Glass
Scratch-Dig (MIL-PRF-13830B): <40-20
Peak Transmission: 92.04% (at 652nm)
Bandwidth: 630-684nm (>1% Transmission)

52mm Plastic Threaded Version:

This is an inexpensive red daylight plastic filter and does not block the light like the other filter size options. It simply tints the images red.

Supermount Version:
This small filter is inserted into the sensor side of the Supermount during internal GoPro Supermount installation. Simply push the filter in with a clean cloth or non-marring tool making sure both sides are free of dust and smudges.

Specifications:
Weight: 0.27g
Diameter: 12.53mm
Thickness: 1.0mm
Optics Material: Glass
Scratch-Dig (MIL-PRF-13830B): <40-20
Peak Transmission: 92.04% (at 652nm)
Bandwidth: 630-684nm (>1% Transmission)

m12 Version:
This small filter is inserted into the sensor side of a m12 lens mount. You will need to unscrew the lens mount from the sensor to install if you have a lens already installed. If you don't have a lens, simply drop it down the m12 lens mount barrel. Make sure to use a clean cloth and clean the filter before insertion, making sure both sides are free of dust and smudges.

Specifications:
Weight: 0.27g
Diameter: 11.35mm
Thickness: 1.0mm
Optics Material: Glass
Scratch-Dig (MIL-PRF-13830B): <40-20
Peak Transmission: 92.04% (at 652nm)
Bandwidth: 630-684nm (>1% Transmission)